Parts & Accessories
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$7.99
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$8.99
Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals.
- Provide durability and improved safety
- Mix and match with the longer stock pins to customize your ideal amount of grip

$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe.
- Kit includes eight 1mm traction pads and eight 2mm traction pads

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$9.99
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$9.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer

$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$10.00
- Nylon construction
- Intended for use with double-strap toe straps (sold separately)
- Includes mounting hardware
- 36 grams per pair

$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair

$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$12.99
Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance.
Includes:
- Sealed Bearing x2pcs
- 10mm IGUS Bushing x2pcs
- Green Friction Seal x2pcs
- Locknut
- O-ring x 2pcs

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$15.00
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface.
- Compatibility: KEO Grip/KEO Cleat
- Use: Protect the cleat

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$17.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Lateral
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$17.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Multidirectional
- Clip in: 30% easier
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g

$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$19.90
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

$20.00
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick.
- Includes: 32 pins and wrench

$21.99
- Compatible with all Spike & Oozy Pedals
- Full Complement Sealed Bearing x 2pcs
- Green Silicone Friction Seals
- Replacement inboard bearings for your SPIKE or OOZY pedals.

$22.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g
Page 1 of 3
Next page